Before STL models can be sent to a 3D printer they need to be converted into format recognized by a specific make and model of a printer. This job is usually done by software distributed with a printer. Besides, additional manipulations need to be done: the model must be properly positioned at the very centre […]
|
||||||
Grand Prize Winner (Dec 2012) 
Second Prize Winner (July 2012) 
Unless otherwise stated, this work is licensed under
a Creative Commons Attribution-ShareAlike 3.0 License
The idea of making enclosure fully out of acrylic panels was abandoned due to ‘squarish’ look of the final product. We really wanted to create something a little bit more stylish and this is why the most obvious choice was 3D printing. That way it was possible to make rounded corners and streamline shape. However, […] This is a second spin of Luminardo boards with the focus on elimination minor mistakes found in the revision 1.0. A motion sensor is fully integrated with the PCB this is why the board has an inflow on top of its outline. Also an obsolete inductor is replaced with the one of a similar footprint […] |
||||||
|
Copyright © 2024 Magictale Electronics - All Rights Reserved |
||||||
