Here is a demonstration of DefendLineII project working together with GSM/GPS Module.
|
||||||
Here is a demonstration of DefendLineII project working together with GSM/GPS Module. Module software support includes GSM module library and an example of its typical usage for ATMega microprocessor family written in C/C++. The logic of interaction with SIM900D modem is enclosed in SIM900Modem.c, SIM900Modem.h files and relies on enhanced version of HardwareSerial class originally designed for Arduino project. As SIM900Modem.c does not depend on AVR specific […] Components are soldered on both sides of the PCB. Only components that need to provide the required functionality should be soldered. Depending on your situation, some components such as CONN1, CONN2, CONN4, CONN5, L1 etc can be soldered on either side of the board. There is no strict sequence for soldering but U1 should be […] The GSM part is based on SIM900D GSM module. SIM300DZ has the same pin layout and designation so it might be used as a replacement of SIM900D. Q1 transistor, R2, R3 and R4 resistors are used to drive LED1 ‘NET LIGHT’ which indicates module networking status. CONN4 is a SMT antenna connector. Q2 transistor and […] This module is a cost effective and flexible solution providing your own microcontroller with wireless Internet connectivity, remote controlling via SMS and GPS functionality. As a GSM module either SIM900D or SIM300DZ might be used, some of the most affordable GSM modules currently on the market featuring embedded TCP/IP stack over AT commands so measurement […] GSM/GPS module is a compact, flexible and powerful solution allowing to add GPS functionality and/or Internet connectivity to your own device with minimum effort. The module is designed as one of a few interchangeable transport connectors for DefendLineII project but could […] |
||||||
Copyright © 2024 Magictale Electronics - All Rights Reserved |