|
||||||
Grand Prize Winner (Dec 2012) 
Second Prize Winner (July 2012) 
Unless otherwise stated, this work is licensed under
a Creative Commons Attribution-ShareAlike 3.0 License
Introducing a more stylish look of the enclosure made of white PLA material and translucent blue front and rear panels. It is very hard to find acrylic material other than transparent white with 2mm thickness so we had to modify the top and bottom shells to be able to fit 3mm thick panels.
The idea of making enclosure fully out of acrylic panels was abandoned due to ‘squarish’ look of the final product. We really wanted to create something a little bit more stylish and this is why the most obvious choice was 3D printing. That way it was possible to make rounded corners and streamline shape. However, […] The whole process from initial design to final assembling is presented in this video. We aimed to make it alive, entertaining and easy to watch. Hope you will like it! Assembling process is very simple and it is shown on the pictures below. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 VFD MagiClock Assembled Greets You VFD MagicClock Assembled Greets You VFD MagicClock […] To give any electronic project a neat look it is always very important to put it in an enclosure of appropriate sizes and shapes. Our VFD clock is not an exception and also needs a box. There are at least three ways to do so. First is to find something off-the-shelf. This is probably the […] |
||||||
|
Copyright © 2024 Magictale Electronics - All Rights Reserved |
||||||
