Electronic OBDII Gauge on Luminardo

Let’s make something more complex using Luminardo, a Bluetooth dongle, a OBDII translator ELM327 and a 128×64 pixels graphical monochrome OLED display SSD1306. The plan would be to utilise USB host functionality to communicate to ELM327 via SPP interface and represent such parameters as engine RPM, vehicle speed, battery voltage, remaining fuel on a display. […]

Interfacing SSD1306 OLED Display with Luminardo

Some time ago we began looking for alternative displays for our Luminardo project and got inspired by a DIY OLED interface board. The author found cheap monochrome OLED displays on Ebay, designed an interface board and wrote a C library. In addition to that some more information on driving such display type was found at […]

Arducam Rev.C – First Encounter

This article was prepared back in October 2013 but remained unpublished all these months. At first, when we got Arducam Rev.C in possession its rich set of features and performance inspired us greatly. However, just within a few days the interested moved on, became dim and then quickly faded away. It simply turned out that […]